Hydraulic & Pneumatic Equipment, Without the Guesswork
When uptime is non-negotiable, you need gear that’s ready to work the moment it arrives. Our hydraulic and pneumatic range covers everything from air-driven pumps and gas boosters to high-pressure HPUs and regulators — all maintained, ATEX-ready where required, and available to hire or buy with rapid turnaround. No trial-and-error.
Proven, field-ready solutions sized by engineers who’ve done it before.
Equipment Ready to Buy
Fittings
TWIN FERRULE COMPRESSION FITTINGS
Fractional & Metric
316 Stainless Steel, Brass & Exotics
MEDIUM / HIGH PRESSURE FITTINGS
HP / MP Adaptors
HP / MP Tee’s, Crosses, Elbows
HP / MP Valves
HP / MP Tubing
Coning & Threading Tools
INSTRUMENTATION FITTINGS
BSPT, BSPP, JIC, NPT
DIN 2353 Metric tube fittings
10k / 15k Stainless Steel
Valves & Manifolds
- Needle Valves
- Ball Valves
- Plug Valves
- Check Valves
- Relief Valves (Setting Available)
- Bleed Valves
- Diaphragm Valves
- Actuated Valves
- Twin Ferrule Compression Valves
- Medium / High Pressure Valves
- Instrument Manifolds
Tubing & Tube Accessories
Gauges
- Pressure Gauges
- Subsea Pressure Gauges
- Digital Gauges
- Temperature Gauges
- Vacuum Gauges
- Safety Pattern Gauges
- Pressure Snubbers
- Calibration & Certification
Hose Assemblies
Couplings
Hose Couplings
- Camlocks
- Dry Break Couplings
- Crowsfeet
- MacDonalds
- Hammer Lug Unions
Quick Release Couplings
- Hydraulic
- Air
- High Pressure
- Steel / Stainless Steel
Pumps & Spares
- Air Driven Pumps and Spares
- Diaphragm Pumps and Spares
- Hand Pumps
- Gas Boosters
- Water Separators
- ATEX-rated available
Pneumatic Components
Regulators
Ancillary Equipment
.avif)
Flowline & FIG Fittings Available for Hire & Sale
PPM offers a range of FIG-rated flowline fittings available for hire, supporting high-pressure hydraulic and pneumatic operations across oil & gas and industrial environments.
Our hire fleet includes pup joints, hammer unions, crossovers, elbows, tees, swivel joints, bull and gauge plugs, and plug valves. Equipment is available for standard and sour gas (H₂S) service, with working pressures up to 15,000 PSI, depending on configuration. All fittings are supplied pressure tested and maintained to industry standards.
Hiring flowline fittings through PPM provides fast access to certified, job-ready equipment without the cost or lead time of ownership. Our team can also advise on FIG selection and pressure ratings to ensure a safe, compliant setup for your application.
Why Hire From PPM?
When delays cost money, reliability and speed aren't optional. Our gear is ATEX-rated, offshore-ready, and arrives job-ready.
But more importantly — our engineers don’t just supply equipment. They ask the right questions, guide the spec, and help you avoid the risk of over- or under-engineering the job.
ATEX-rated & offshore ready
Pumps and skids certified for hazardous and offshore environments.
Same-day dispatch available
Urgent job? Many units are stocked and ready to move.
Plug-and-play systems
Arrive ready with ESD, trace heating, bunded tanks, suction/discharge kits & more.
In-house servicing & support
Need training or commissioning? Our techs have you covered.
Spares & consumables stocked
No job gets held up for a missing part — we carry what matters.
Why Choose PPM for Hydraulics & Pneumatics
Ready to Deploy
Stocked units, crash‑frame options, offshore‑ready enclosures.
Engineer-Specified
We’ll size for pressure, flow, duty cycle, and media.
Certified & Documented
Inspection sheets, serialised assets, ATEX where applicable.
Support on Tap
Set‑up help, commissioning, and spares.
We Often Get Asked
Get answers to your most pressing questions about our Hydraulic & Pneumatic services.
Yes. All listed hydraulic and pneumatic equipment is available for both short- and long-term hire, as well as for outright purchase.
Absolutely. We can configure units to meet your exact operating parameters, ensuring the equipment is fit for your application.
Our equipment meets industry-recognised standards, with certification available on request to match site and project compliance needs.
We offer rapid turnaround, with many core units available for same-day dispatch to minimise downtime.
Yes. Our team can provide on-site installation and commissioning to ensure equipment is operational from day one.
Yes. If you require a specialist part or bespoke build, our procurement team can source or fabricate it to specification.
Need Support Fast?
Talk today to someone who gets it - We don’t do call centres. You’ll speak to someone who’s solved this problem before, not a sales person.
